主要特點

 Sub-1GHz RF transceiver compliant to IEEE802.15.4g/x

 ARM Cortex-M3 CPU with embedded flash and SRAM memory

 Support large scale networking (Wi-SUN FAN 1.0 and FAN 1.1)

 Support small-to-medium scale easy networking

 Support real-time applications

 Embedded hardware security accelerator

 Abundant interfaces for versitile IoT appliations

 Low power consumption

 MCU

• 
  

• 32-bit Cortex M3 with maximum 39.3126 MHz clock

• 
  

• Single cycle multiplier

• 
  

• Standard 2-wires SWD debug port

• 
  

• 512/1024 KB Flash with write protect, support both IAP and ISP

• 
  

• 128 KB SRAM with parity check and data retention under sleep mode

• 
  

• 16 KB SRAM with data retention under deep-sleep mode

• 
  

• Support abort exception detection including flash check-sum error, SRAM parity error, memory address error and memory align error

• 
  

• Support boot from embedded flash or boot from internal ROM with IO strap option

• 
  

 Interface Controller

• 
  

• Support SPI flash and SPI SRAM for program execution and direct data read/write

• 
  

• 4 UART controllers with parity check and transmit/receive FIFOs

• 
  

• Each IR channel can be coupled with IR carrier for IR transmission

• 
  

• 1 SPI master/slave controller

• 
  

• 1 I2C master/slave controller

• 
  

• 
  

• 4 32-bit timers

• 
  

• 4 16-bit PWM timers

• 
  

• 4-channels DMA controller

• 
  

• AES-128/192/256 CODEC

• 
  

• ECC encrypt/decrypt accelerated engine

• 
  

• Watch dog timers with programmable period

• 
  

• Support multiple wake-up sources under each mode

• 
  

• Maximum 35 GPIOs

• 
  

• 11 GPIOs with external interrupt and wakeup sources

• 
  

• Key scan controller supporting up to 16 keys with 4x4 matrix

• 
  

• 
  

• 1 Msps 10-bit ADC with 6 external inputs

• 
  

• ADC supports manual sample mode or auto sample mode

• 
  

• 1 comparator with single end input or differential input

• 
  

• Embedded 32 KHz and 39.2166 MHz RCO

• 
  

• Support external 32 KHz crystal

• 
  

• Support crystal absent detection for 32KHz

• 
  

• Each clock can be selected as system clock

• 
  

• Support digital clock divider up to 256x

• 
  

• Support low voltage detection with programmable level

• 
  

• Support power-on reset for both IO voltage and core voltage

• 
  

• Support RTC auto-calibration (accuracy: 1 ppm)

• 
  

 Support IEEE 802.15.4g/x, wireless M-Bus

 Support modulation schemes: OOK, 4/(G)FSK, GMSK and OFDM

 Support sub-1GHz bands: 230, 315, 433, 490, 868, 915 MHz

 Excellent selectivity performance

• 
  

• Adjacent channel rejection: >48 dB

• 
  

• Blocking signal rejection: >75 dB

• 
  

 Receiver sensitivity

• 
  

• -109 dBm at 50 kbps

• 
  

 Maximum data rate: 300 kbps (FSK) and 3.6Mbps (OFDM)

 Configurable maximum transmit output power :

• 
  

• HPA output: +20 dBm

• 
  

• MPA output: +13 dBm

• 
  

 Automatic output power ramping

 Automatic RX wake-up for low power listen

 Fast wake-up and AGC for low power listen

 Functions for link robustness:

• 
  

• Frequency hopping

• 
  

• Auto-acknowledgement

• 
  

• Auto-retransmission

• 
  

 RSSI and clear channel assessment for listen-before-talk

 Support packet over packet reception for reliable communication

 Early reception termination:

• 
  

• Receiving error detection

• 
  

• Receiver identification filtering

• 
  

 Operating Voltage: 2.0 V ~ 3.6 V

 Package:

• 
  

• VC7000: QFN-32 (5 x 5mm)

• 
  

• VC7200: QFN-64 (9 x 9mm)

• 
  

• VC7300B: QFN-64 (9 x 9mm)

• 
  

• VC7351: QFN-68 (8 x 8mm)

• 
  

 Operation Temperature: -40 ~ +85 °C

 Power consumption of VC7000:

• 
  

• RX mode: 18 mA

• 
  

• TX mode: 45 mA@+13 dBm, 110 mA@+20 dBm

• 
  

 Power consumption of SoCs:

• 
  

• Sleep mode:

• 
  

• 
  

• VC7200: ~2 uA

• 
  

• VC7300B: ~9 uA

• 
  

• 
  

• Deep sleep mode: <1.1 uA

• 
  

 基于 802.15.4g 的專有網絡

 Wi-SUN FAN 和 HAN 應用

 無線 M-Bus

 智能電表：瓦斯表、水表、熱量表、電表等

 智能家居和建筑

 工業監控

 無線警報和安全系統

系統框圖

訂購資訊